All parts of this set are never been used or almost never been used
 
Including:

- Schaublin number 70-96.100    Motor Attachment 380V 2 speed 750 and 1500rpm 
- Schaublin number 70-25.064    3 Jaw chuck 2x3 Jaws W12
- Schaublin number 80-00.002    Collet set 39 pieces 0.5-12mm
- Schaublin number 70-65.000    Screw-operated-tailstock
- Schaublin number 70-68.000    Lever operated drilling tailstock W12 number 70-68
- Schaublin number 70-32.030    Collet drawbar W12
- Schaublin number 70-25.001    Male centre W12
- Schaublin number 70-25.005    Female centre W12
- Schaublin number 70-30.600    Lever operated quick-closing attachment W12
- Schaublin number 70-25.180    Protective nut for W12 spindle nose
- Schaublin number 70-25.095    Drive plate
- Schaublin number 70-45.000    Screw operated carriage - Schaublin toolholder
- Schaublin number 70-25.020    Drill chuck 0.3-6.4mm on W12 arbor
- Schaublin number 70-87.350    Complete milling attachment (vertical slide, spindle W12)
- Schaublin number 70-25.022    Cutter arbor W12 ø5x4
- Schaublin number 70-25.024    Cutter arbor W12 ø8x4
- Schaublin number 70-25.025    Cutter arbor W12 ø10x4
- Schaublin number 70-25.028    Cutter arbor W12 ø13x4
- Schaublin number 70-25.031    Cutter arbor W12 ø16x4
- Schaublin number 70-25.080    6-jaw chuck ø100 2x6 jaws internal and external grippin on W12 arbor
- Schaublin number 70-25.110    Faceplate ø138mm and three T-slots for W12 spindle
- Schaublin number 70-20.150    Clamps for fitting in the T-slots
- Schaublin number 70-74.061    Drilling vee
- Schaublin number 70-74.001    Centre
- Schaublin number 70-74.021    Centre
- Schaublin number 70-91.000    Hand rest
- Schaublin number 70-91.110    Sawing table
- Schaublin number 70-90.000    Fixed steady
- Lista cabinet with motor switch (see video 3) (weight 28Kg)